The KICKER Real Marine standard means your amplifier is purpose-built for your boat. Every KXMA (and KMA)-Series amp comes complete with anti-corrosive speaker, power and RCA terminals, stainless-steel screws, conformal-coated circuit boards and ABYC/NMMA-compliant power connections. KICKER products also undergo rigorous testing to ensure they meet or exceed marine industry standards for UV, humidity and saltwater exposure. This unparalleled commitment to engineering quality and maritime safety is why our products truly are "Real Marine."
KXMA900.5 Marine Amplifier
Gain, crossover and bass-boost controls are protected behind a gasket-sealed panel, as is the control cover hiding the settings, creating a water-resistant barrier to key controls. KickEQ™ delivers as much as an 6dB of extra bump with a simple turn of the knob. A powerful 24dB crossover is also included, letting you quickly tune your system to perfection.
A wired bass controller is also included for perfecting your sound on the fly. Easily adjust the levels of your subwoofer channel without leaving your seat!
Want setup help? Go to KICKER U for a free woofer-and-amp configuration app!
This KXMA amplifier delivers as much as 125 watts into four full-range channels, or 250 watts into two sets of bridged channels. A separate subwoofer channel delivers as much as 400 watts. See below for more details.
|POWER [watts/ch], 2 OHM STEREO|
|125 x 4|
|POWER [watts/ch], 4 OHM STEREO|
|100 x 4|
|POWER [watts/ch], 4 OHM BRIDGED MONO|
|250 x 2|
|SUB CHANNEL POWER [watts/ch]|
|4Ω power: 200x1 @ 1% THD+N|
2Ω power: 400x1 @ 1% THD+N
1Ω power: 400x1 @ 1% THD+N
|DYNAMIC POWER [watts]:|
|DIMENSIONS [in] all models 2-1/8H x 8-5/16W x ___L|
|DIMENSIONS [cm] all models 5.4H x 21.0W x ___L|
|FREQUENCY RESPONSE [Hz]|
|(amp 1&2) 10-20k, +0/-1dB; (mono) 10-160|
|High Level 250mV-10V, Low Level 125mV-5V|
|>95dB, a-weighted, re: rated power|
|Full-Range - (amp 1) 24dB/octave, variable 10-5kHz w/ 10x switch, selectable high pass, low pass or all pass
(amp 2) 24dB/octave, variable high pass 10-500Hz, variable low pass 40-5kHz w/ 10x switch, selectable high pass, low pass, all pass or band pass;
Sub Ch. – 24dB/octave, variable 40-160Hz low pass only'
|SUBSONIC FILTER [KXMA.5]:|
|(mono only) high-pass variable 10-80Hz|
|(mono only) Variable 0-6dB, centered 40Hz|
|COMES WITH WIRED REMOTE|
|When purchased from an Authorized KICKER Dealer or kicker.com, KICKER warrants this product to be free from defects in material and workmanship under normal use for a period of THREE (3) YEARS from date of original purchase. - Complete warranty information here.|
RMS Power test @ 14.4v @ </- 1% THD+N, Audio Precision® APx500 analyzer, see www.kicker.com/amp-power-testing for details.
Dynamic Power test @ 14.4v @ </- 10% THD+N, Audio Precision APx500 analyzer, see www.kicker.com/amp-power-testing for details.
Audio Precision is a registered trademark of Audio Precision in the United States and other countries.
Important Safety Information
When installing KICKER amplifiers (car or marine) in a boat or other vehicle/environment where flammable fuel vapors can accumulate rather than dissipate, you must use appropriate MARINE fuses, MARINE fuse holders, and MARINE wiring to minimize the risk of fire or explosion.
8am - 5pm CST
8am - 5pm CST
© , Stillwater Designs. All rights reserved. Copyright and Trademark Notice.