2019 CX800.1 Amplifier

About That Power

This CX-Series Mono Amp is now one-ohm stable, giving you even more power and wiring options for your system! This Class-D CXA800.1 features a variable bass boost with KickEQ™, giving you as much as a 6dB of extra bump. A powerful 12dB crossover and 24dB subsonic filter is included, letting you quickly tune your system to perfection. Use the full-range outputs to expand your system with other bass amps, or a full-range amp to complete your system. From your dash, a simple turn of the optional CXARC Remote Bass Controller (sold separately) increases your output to fit your choice of music.

CX-Series Amplifiers accept up to 40 volts (400 watts) of speaker-level input signal. This kind of flexibility both makes line-out converters unnecessary and optimizes your sound quality at the same time!

Expand your system with full-range, RCA pass-through outputs, then choose a “standard” mount or a cool vertical mount with the included hardware.

This CX.1 amplifier delivers as much as 800 watts into one bass channel. See below for more details.

Efficient Class-D amplifier
Three-second turn-on/off delay to eliminate unwanted interference
Variable 12dB crossovers provides control to dial in perfect sound
KickEQ™ 6dB variable bass boost for those additional low frequencies
24dB subsonic filter for protection from potentially damaging frequencies
FIT+™ (Fail-safe Integration Technology-PLUS) means it works with nearly every radio
Accepts up to 40-volt input signal
Small footprint for easier installation
Compatible with CXARC Remote Bass Control
Vertical mounting hardware included for another unique look

If you have two mono amps or powered subwoofers, check out the DBRC Remote for controlling both from the same knob.

Specifications

MODEL

CXA800.1

Power (watts/ch) 4 Ohm

300x1

Power (watts/ch) 2 Ohm

600x1

Power (watts/ch) 1 Ohm

800x1

CXRC Remote Bass Capable (sold sep.)

yes

Dimensions (in, cm): (all models 2-3/8, 5.9H x 6-3/4, 17W x ...L)

8-1/8, 20.6

Frequency Response (Hz):

25-200, +0/-1dB

Input Sensitivity:

125mV–5V (Low Level)
1V–40V (High Level)

Signal-to-Noise Ratio:

>95dB, a-weighted, re: rated power

Active Crossover:

Variable Lo-pass 50Hz–200Hz, 12dB/octave

Subsonic Filter:

25Hz @24dB/octave

KickEQ™ Boost

Variable 0-6dB @40Hz

Warranty

When purchased from an Authorized KICKER Dealer or kicker.com, KICKER warrants this product to be free from defects in material and workmanship under normal use for a period of TWO (2) YEARS from date of original purchase. - Complete warranty information here.

You may also like these related products*